3834 Consulting
The series UNI EN ISO 3834 – Quality requirements for fusion welding of metallic materials – specifies the quality requirements for fusion welding processes of metallic materials. It is a process standard that supports UNI EN ISO 9001 (Quality Management Systems – Requirements) with respect to processes identified as special. It applies to welding processes performed in the workshop as well as to processes performed directly on the construction site.
WHY GET CERTIFIED?
- Proof of the quality of welding processes
- Customers requiring the fulfilment of international requirements
- Continuous improvement of production processes in the company
- In case of litigation, it is possible to respond to legal cases by proving “professional” production.
Solving UNI.on aims to support companies throughout the process of control and adaptation to the standard.
Specifically:
- Guidance and support in the preparation of the technical review and requirements
- Analysis of the management of subcontracts
- Qualification and certification of welders and welding operators (UNI EN ISO 9606 and UNI EN ISO 14732)
- Training and qualification of welding supervisors (UNI EN ISO 14731)
- Training and qualification of personnel responsible for nondestructive testing (UNI EN ISO 9712)
- Equipment and requirements verifications
- Drafting and qualification of welding procedures (WPS and WPQR, according to UNI EN ISO 15609 and UNI EN ISO 15614)
- Drafting and validation of control procedures
- Development of forms and internal documentation for data recording
1090 Consulting
The UNI EN 1090 series – Execution of steel and aluminum structures specifies the requirements relating to the design and manufacturing of components and load-bearing structures in steel or aluminium. It is a product standard concerning structural metal carpentry, and defines the requirements to be able to issue products on the European market (CE marking), in accordance with the provisions of European regulation 305/2011.
WHY GET CERTIFIED?
- Being able to trade your products within the European market
- Customers requiring satisfaction of international requirements
- Continuous improvement of company production processes
- It allows access to public contracts for which compliance with the law is a contractual requirement
Solving UNI.on aims to support companies throughout the control and adaptation process to the standard.
In particular:
- Instructions and support on drafting the manual for factory production control (FPC)
- Instructions and support on drafting the declaration of performance (DOP)
- Analysis of sub-contract management
- Qualification and certification of welders and welding operators (UNI EN ISO 9606 and UNI EN ISO 14732)
- Welding coordinator training and qualification (UNI EN ISO 14731)
- Training and qualification of personnel responsible for non-destructive testing (UNI EN ISO 9712)
- Verification of the equipment and required requirements
- Drafting and qualification of welding procedures (WPS and WPQR, according to UNI EN ISO 15609 and UNI EN ISO 15614)
- Drafting and validation of control procedures
- Development of forms and internal documentation for data recording
- Instructions and support on the drafting and creation of component specifications, Itial Type Testing (ITT) and Initial Type Calculation (ITC)
3834 Consulting
The series UNI EN ISO 3834 – Quality requirements for fusion welding of metallic materials – specifies the quality requirements for fusion welding processes of metallic materials. It is a process standard that supports UNI EN ISO 9001 (Quality Management Systems – Requirements) with respect to processes identified as special. It applies to welding processes performed in the workshop as well as to processes performed directly on the construction site.
WHY GET CERTIFIED?
- Proof of the quality of welding processes
- Customers requiring the fulfilment of international requirements
- Continuous improvement of production processes in the company
- In case of litigation, it is possible to respond to legal cases by proving “professional” production.
Solving UNI.on aims to support companies throughout the process of control and adaptation to the standard.
Specifically:
- Guidance and support in the preparation of the technical review and requirements
- Analysis of the management of subcontracts
- Qualification and certification of welders and welding operators (UNI EN ISO 9606 and UNI EN ISO 14732)
- Training and qualification of welding supervisors (UNI EN ISO 14731)
- Training and qualification of personnel responsible for nondestructive testing (UNI EN ISO 9712)
- Equipment and requirements verifications
- Drafting and qualification of welding procedures (WPS and WPQR, according to UNI EN ISO 15609 and UNI EN ISO 15614)
- Drafting and validation of control procedures
- Development of forms and internal documentation for data recording
1090 Consulting
The UNI EN 1090 series – Execution of steel and aluminum structures specifies the requirements relating to the design and manufacturing of components and load-bearing structures in steel or aluminium. It is a product standard concerning structural metal carpentry, and defines the requirements to be able to issue products on the European market (CE marking), in accordance with the provisions of European regulation 305/2011.
WHY GET CERTIFIED?
- Being able to trade your products within the European market
- Customers requiring satisfaction of international requirements
- Continuous improvement of company production processes
- It allows access to public contracts for which compliance with the law is a contractual requirement
Solving UNI.on aims to support companies throughout the control and adaptation process to the standard.
In particular:
- Instructions and support on drafting the manual for factory production control (FPC)
- Instructions and support on drafting the declaration of performance (DOP)
- Analysis of sub-contract management
- Qualification and certification of welders and welding operators (UNI EN ISO 9606 and UNI EN ISO 14732)
- Welding coordinator training and qualification (UNI EN ISO 14731)
- Training and qualification of personnel responsible for non-destructive testing (UNI EN ISO 9712)
- Verification of the equipment and required requirements
- Drafting and qualification of welding procedures (WPS and WPQR, according to UNI EN ISO 15609 and UNI EN ISO 15614)
- Drafting and validation of control procedures
- Development of forms and internal documentation for data recording
- Instructions and support on the drafting and creation of component specifications, Itial Type Testing (ITT) and Initial Type Calculation (ITC)