Non-Destructive Testing
Training Center

Qualified technical staff, level 3 according to UNI EN ISO 9712 or to SNT-TC-1A recommendation and with decades of experience in the field, are at your disposal to help you design specific and customized training paths, working between theoretical modules and practical parts performed on state-of-the-art equipment, products and real defects.

The Solving UNI.on training center offers training in the following methods:

  • Visual (VT – Visual Testing)
  • Liquid Penetrants (PT – Penetrating Testing)
  • Magnetic (MT – Magnetic Particles Testing)
  • Ultrasonic (UT – Ultrasonic Testing)
  • Radiographic (RT – Radiographic Testing)

These courses can be followed by a certification according to UNI EN ISO 9712.

The courses can be carried out either at the Solving UNI.on headquarters in Carpi (MO), or at the customer’s headquarters.

AIM OF THE COURSES

The course aims to train participants in the execution of visual non-destructive checks, in accordance with the requirements of UNI EN ISO 9712 both at a basic level (level 1) and at a medium level (level 2) or in accordance with the SNT- Recommendation TC-1A. Support and preparatory training courses dedicated to achieving the 3rd level are also carried out.

TARGET AUDIENCE

The courses are aimed at individuals and companies who intend to develop and/or certify skills for non-destructive testing. Anyone who requests it can participate in the course, however there are some limitations for the certification (for example visual suitability).

DURATION OF THE COURSES

For each course, the durations required by law are shown. However, the durations can still be varied depending on the basic preparation of the participants and the needs of the client.

COURSES CONTENTS

The contents of the courses are in accordance with the provisions of UNI EN ISO 25107.

VT Course

TARGET AUDIENCE
Designed for inspectors, control technicians, quality system workers, process operators.

COURSE DURATION
9712 level 1: 3 days + final certification exam (if required)
9712 level 2: 3+2 days + final certification exam (if required)

EXAMPLE OF METHOD STANDARDS
UNI EN 13018 Non-destructive testing – Visual examination – General principles

EXAMPLE OF PRODUCT REGULATIONS
UNI EN 1370, UNI EN ISO 17637, UNI EN 12272-2

PT Course

WHO IS IT ADDRESSED TO
Designed for inspectors, control technicians, quality system workers, process operators.

DURATION OF THE COURSE
9712 level 1: 3 days + final certification exam (if required)
9712 level 2: 3+2 days + final certification exam (if required)

EXAMPLE OF METHOD STANDARDS
UNI EN ISO 3452 Series Non-destructive testing – Examination with penetrating liquids

EXAMPLE PRODUCT REGULATIONS
UN EN 1371, UNI EN 10228-2 UNI EN ISO 10893-4, UNI EN ISO 23277 series

MT Course

TARGET AUDIENCE
Designed for inspectors, control technicians, quality system workers, process operators.

DURATION OF THE COURSE
9712 level 1: 3 days + final certification exam (if required)
9712 level 2: 3+2 days + final certification exam (if required)

EXAMPLE OF METHOD RULES
UNI EN ISO 9934 Series Non-destructive testing – Magnetoscopy

EXAMPLES OF PRODUCT REGULATIONS
UN EN 1369, UNI EN 10228-1, UNI EN ISO 17638

UT Course

WHO IS IT ADDRESSED TO
Designed for inspectors, control technicians, quality system workers, process operators.

DURATION OF THE COURSE
9712 level 2: 8+10 days + final certification exam (if required)

EXAMPLE OF METHOD RULES
UNI EN ISO 16810 Non-destructive testing – Ultrasonic examination – General principles

EXAMPLES OF PRODUCT REGULATIONS
UNI EN ISO 17640, UNI ISO 29821-2, UNI EN 10228-3, UNI EN 12680-1 Series

RT Course

WHO IS IT ADDRESSED TO
Designed for inspectors, control technicians, quality system workers, process operators.

DURATION OF THE COURSE
9712 level 1: 5 days + final certification exam (if required)
9712 level 2: 5+10 days + final certification exam (if required)

EXAMPLE OF METHOD RULES
UNI EN ISO 5579, UNI EN 13068 series

EXAMPLES OF PRODUCT REGULATIONS
EN ISO 17636 Series, 1268 Series

Non-Destructive Testing
Training Center

Qualified technical staff, level 3 according to UNI EN ISO 9712 or to SNT-TC-1A recommendation and with decades of experience in the field, are at your disposal to help you design specific and customized training paths, working between theoretical modules and practical parts performed on state-of-the-art equipment, products and real defects.

The Solving UNI.on training center offers training in the following methods:

  • Visual (VT – Visual Testing)
  • Liquid Penetrants (PT – Penetrating Testing)
  • Magnetic (MT – Magnetic Particles Testing)
  • Ultrasonic (UT – Ultrasonic Testing)
  • Radiographic (RT – Radiographic Testing)

These courses can be followed by a certification according to UNI EN ISO 9712.

The courses can be carried out either at the Solving UNI.on headquarters in Carpi (MO), or at the customer’s headquarters.

AIM OF THE COURSES

The course aims to train participants in the execution of visual non-destructive checks, in accordance with the requirements of UNI EN ISO 9712 both at a basic level (level 1) and at a medium level (level 2) or in accordance with the SNT- Recommendation TC-1A. Support and preparatory training courses dedicated to achieving the 3rd level are also carried out.

TARGET AUDIENCE

The courses are aimed at individuals and companies who intend to develop and/or certify skills for non-destructive testing. Anyone who requests it can participate in the course, however there are some limitations for the certification (for example visual suitability).

DURATION OF THE COURSES

For each course, the durations required by law are shown. However, the durations can still be varied depending on the basic preparation of the participants and the needs of the client.

COURSES CONTENTS

The contents of the courses are in accordance with the provisions of UNI EN ISO 25107.

VT Course

TARGET AUDIENCE
Designed for inspectors, control technicians, quality system workers, process operators.

COURSE DURATION
9712 level 1: 3 days + final certification exam (if required)
9712 level 2: 3+2 days + final certification exam (if required)

EXAMPLE OF METHOD STANDARDS
UNI EN 13018 Non-destructive testing – Visual examination – General principles

EXAMPLE OF PRODUCT REGULATIONS
UNI EN 1370, UNI EN ISO 17637, UNI EN 12272-2

PT Course

WHO IS IT ADDRESSED TO
Designed for inspectors, control technicians, quality system workers, process operators.

DURATION OF THE COURSE
9712 level 1: 3 days + final certification exam (if required)
9712 level 2: 3+2 days + final certification exam (if required)

EXAMPLE OF METHOD STANDARDS
UNI EN ISO 3452 Series Non-destructive testing – Examination with penetrating liquids

EXAMPLE PRODUCT REGULATIONS
UN EN 1371, UNI EN 10228-2 UNI EN ISO 10893-4, UNI EN ISO 23277 series

MT Course

TARGET AUDIENCE
Designed for inspectors, control technicians, quality system workers, process operators.

DURATION OF THE COURSE
9712 level 1: 3 days + final certification exam (if required)
9712 level 2: 3+2 days + final certification exam (if required)

EXAMPLE OF METHOD RULES
UNI EN ISO 9934 Series Non-destructive testing – Magnetoscopy

EXAMPLES OF PRODUCT REGULATIONS
UN EN 1369, UNI EN 10228-1, UNI EN ISO 17638

UT Course

WHO IS IT ADDRESSED TO
Designed for inspectors, control technicians, quality system workers, process operators.

DURATION OF THE COURSE
9712 level 2: 8+10 days + final certification exam (if required)

EXAMPLE OF METHOD RULES
UNI EN ISO 16810 Non-destructive testing – Ultrasonic examination – General principles

EXAMPLES OF PRODUCT REGULATIONS
UNI EN ISO 17640, UNI ISO 29821-2, UNI EN 10228-3, UNI EN 12680-1 Series

RT Course

WHO IS IT ADDRESSED TO
Designed for inspectors, control technicians, quality system workers, process operators.

DURATION OF THE COURSE
9712 level 1: 5 days + final certification exam (if required)
9712 level 2: 5+10 days + final certification exam (if required)

EXAMPLE OF METHOD RULES
UNI EN ISO 5579, UNI EN 13068 series

EXAMPLES OF PRODUCT REGULATIONS
EN ISO 17636 Series, 1268 Series